HOFTRONIC™ - 25x LED T8 (G13) Fluorescent tube 120 cm - VSA Suitable - 25 Watt - 3750 Lumen - 4000K Neutral white replaces 100W (100W/840) Flicker-free - 150lm/W

VSA LED T8 (G13) fluorescent tube of 120 cm - 25 Watt flicker-free free (Replaces 100 Watt - 100W/840) gives 3750 Lumen - 150lm/W - 4000K Neutral white light, starter included 

This LED T8 tube is manufactured from the highest quality materials and equipped with high lumen LED chips. The uniqueness of this LED tube is the high light output of 150 Lumen per Watt, this ensures low consumption and a high light output of 3750 Lumen. By replacing your traditional fluorescent tubes with this high lumen LED tube, you will immediately start saving money and you will have a higher light output. This LED tube can be replaced one-on-one with your current fluorescent tubes without modifying your current fixture, which means that no installer is needed. When connecting the TL LED tube to a Hoftronic luminaire, you no longer need a dummy starter. 

Compatible with electronic ballasts

This LED tube is made to be placed in traditional luminaires without having to make any adjustments. This LED tube can be placed in the traditional lighting fixture without having to remove the ballast or cut cables. Very easy to install in no time! No more hassle with electronic ballasts, that is now in the past. 

Flicker-free unique patented design

The LED tube has a unique design in which only the highest quality components are used to guarantee unique quality. This LED tube has a patented design which provides an elegant appearance, the housing is made of pure 6063 aluminum and plastic which ensures that there is excellent heat dissipation. The plastic ensures a uniform light distribution. Due to the unique internal structure and high quality components such as a Japanese Rubycon capacitor, where the internal heat generation is up to 91% less than the standard LED tubes. This combination ensures that this LED tube has a guaranteed long life span of 30,000 hours. 

Due to the unique internal structure and high quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz. This means that the light blinks 50 to 60 times per second, with our brains noticing that it is not a stable light, unconsciously the brains have to continuously adjust this, which can cause complaints of fatigue and headaches.

Installation

For both LED and conventional luminaires, we always recommend connecting the tube directly to 230V on one side. This is no longer necessary with this LED tube. It can be supplied with power on both sides.

If you want to replace the fluorescent tubes in your existing fixture, this is also no problem. This LED tube is extremely suitable for replacement. There are several possibilities regarding the installation in a traditional fixture. The LED T8 tube comes standard with a LED starter. If you still have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer, you can use the supplied LED starter. In a fixture with an electronic ballast, you do not have to adjust anything to the fixture. The LED tube is made ready for a fixture that provides power on both sides. 

The LED tube is extremely suitable when your existing fixture has an electronic or high frequency ballast. When your existing fixture does have an electronic or high frequency ballast, and you want to connect a LED tube to this, you only need to screw the LED tube in and it works.

In the downloads you will find the connection diagram of how the new LED tube should be installed.

Product Advantages

• Patented Design & Flicker-Free Technology
• Pure 6063 aluminium for improved heat dissipation
• Fits perfectly in traditional luminaires
• Easy installation
• Long life 30,000 hours & 3 year warranty
• Including LED Starter
• Suitable for conventional luminaires with electronic ballast