V-TAC - LED Emergency lighting with battery - Test button - Remote control - Wall/ceiling mounting - 3 Watt - 6400K - IP65 Waterproof - Incl. icons with escape route indication

LED Emergency lighting with battery wall/ceiling mounting with a consumption of only 3 Watt gives an extra bright daylight white light color of 6400K including escape route indication pictogram

This emergency lamp with escape route signaling is not only suitable for indoor but also outdoor situations. Due to the IP value of IP65, the emergency lamp is resistant to splash water. Due to the thermoplastic PC housing, the luminaire is suitable for operating temperatures from -20°C to +40°C. And with an energy consumption of 3 Watt, the splash-proof emergency lamp is also very energy-efficient.

Emergency Backup Battery

If the emergency lighting fails, you don't have to worry. The emergency lighting has a reliable backup battery that can burn for no less than 3 hours. Thanks to these special NI-Cd batteries, the lamp has a long life and low maintenance. This emergency lighting is fully charged within 12 hours. The emergency lighting only comes on when there is no power available. In dangerous situations where there is no more power, the emergency lighting will do its job by means of the battery. If you want the emergency light to be on continuously, provide the Ls connection with the L wire also called phase wire or brown wire.

Meets NEN-ISO-7010 standards

The emergency lighting complies with NEN ISO 7010 standards. This ensures that you use the right universal emergency pictograms, thus meeting the required standard.

Icons

With this emergency lighting, 4 stickers with pictograms are supplied as standard. These stickers ensure the clear signaling of the lamp. You can easily change these to any desired situation. Hereby we name the arrow directions of the stickers:

1. Arrow direction to the left
2. Arrow direction to the right
3. Arrow direction up
4. Arrow direction down

Installation

You can easily mount this emergency lighting on various options. The emergency lamp can be mounted on a wall as well as on a ceiling. This makes the LED emergency lamp suitable for both indoor and outdoor use.

Tip: If you want the emergency light to burn continuously, easily connect an L-wire, also called phase wire or the brown wire, to the Ls input. This ensures that the emergency light is always supplied with power so that your emergency light will always shine light. Do you want the emergency lighting to only activate in an emergency when there is no power? Then connect the L wire only to the L input.