10x LED Tube 120cm - Ballast - T8 G13 Fitting - 18 Watts 2700 lumens (150lm/W) - 6000K daylight white - Flicker-free - Replaces 70 Watts (70W/860) - Incl. Starter
HOFTRONICSKU: 5447730
Product information
10x LED Tube 120cm - Ballast - T8 G13 Fitting - 18 Watts 2700 lumens (150lm/W) - 6000K daylight white - Flicker-free - Replaces 70 Watts (70W/860) - Incl. Starter
Product information
10x LED Fluorescent Tube 120cm - Ballast - T8 G13 - 18W 2700lm - 6000K - (70W/860)
This high lumen T8 LED tube of 120 cm has a unique design where the highest quality components have been used to ensure the best quality. Because the LED Tube is VSA compatible, it can be placed directly on your current LED fluorescent light without any modifications. The LED tube has an energy consumption of 18 watts with a light output of 2700 lumens (150lm/W). By using aluminum, the tube can lose its heat well.
The insulated driver in the end cap ensures that the LED chips in the tube cannot burn. The LED Tube shines a daylight white light of 6000 degrees Kelvin and the light from the LED Tube is completely flicker free. This makes this LED Tube very suitable for lighting offices, workshops, warehouses and more.
• Saving 80% (150lm/W)
The fluorescent tube shines 150 lumens per watt, which is efficient and gives more light with less power. As a result, you save 80% compared to old fluorescent lighting.
• 30,000 hours (approx. 12 years)
With a lifespan of 30,000 burning hours, at 250 days a year and 10 hours a day, this LED tube will last at least 12 years. You'll have nothing to worry about for the next 12 years.
• T8 fitting (G13)
The fluorescent tube has a T8 fitting. This is the same fitting as the old fashioned G13 fitting. You can therefore replace your current G13 tube 1:1 with this T8 tube.
• Daylight white light colour - 6000K
Daylight white light color that replaces the 860 light color of a traditional fluorescent tube. This light color is widely used in workshops, factories and warehouses.
• Power factor 0.95
Due to the power factor, the tube produces only 5% reactive current. This means that the connected group is only subjected to an additional 5% load. Ideal for large projects.
• Narrow beam angle
This LED Tube shines its light only from the bottom and is therefore also suitable for LED fluorescent lights without reflector caps. Optimal light utilisation.
• Preservation of light colour
The end cap is isolated from the lighting, so heat from the LED chips does not affect the driver. After 50,000 hours, the tube retains 90% of its original light color.
• Flicker-free
The LED tube shines 100% flicker-free light. No complaints such as headaches, fatigue and nausea are prevented. Perfect for offices, workshops and schools.
10x LED Fluorescent Tube 120cm - Ballast - T8 G13 - 18W 2700lm - 6000K - (70W/860)
This high lumen T8 LED tube of 120 cm has a unique design where the highest quality components have been used to ensure the best quality. Because the LED Tube is VSA compatible, it can be placed directly on your current LED fluorescent light without any modifications. The LED tube has an energy consumption of 18 watts with a light output of 2700 lumens (150lm/W). By using aluminum, the tube can lose its heat well.
The insulated driver in the end cap ensures that the LED chips in the tube cannot burn. The LED Tube shines a daylight white light of 6000 degrees Kelvin and the light from the LED Tube is completely flicker free. This makes this LED Tube very suitable for lighting offices, workshops, warehouses and more.
• Saving 80% (150lm/W)
The fluorescent tube shines 150 lumens per watt, which is efficient and gives more light with less power. As a result, you save 80% compared to old fluorescent lighting.
• 30,000 hours (approx. 12 years)
With a lifespan of 30,000 burning hours, at 250 days a year and 10 hours a day, this LED tube will last at least 12 years. You'll have nothing to worry about for the next 12 years.
• T8 fitting (G13)
The fluorescent tube has a T8 fitting. This is the same fitting as the old fashioned G13 fitting. You can therefore replace your current G13 tube 1:1 with this T8 tube.
• Daylight white light colour - 6000K
Daylight white light color that replaces the 860 light color of a traditional fluorescent tube. This light color is widely used in workshops, factories and warehouses.
• Power factor 0.95
Due to the power factor, the tube produces only 5% reactive current. This means that the connected group is only subjected to an additional 5% load. Ideal for large projects.
• Narrow beam angle
This LED Tube shines its light only from the bottom and is therefore also suitable for LED fluorescent lights without reflector caps. Optimal light utilisation.
• Preservation of light colour
The end cap is isolated from the lighting, so heat from the LED chips does not affect the driver. After 50,000 hours, the tube retains 90% of its original light color.
• Flicker-free
The LED tube shines 100% flicker-free light. No complaints such as headaches, fatigue and nausea are prevented. Perfect for offices, workshops and schools.
Key specifications
All specifications
Key specifications
| IP rate | IP20 |
|---|---|
| Output voltage | 60-80V DC |
| Output current | 240 mA |
| Operating-temperature | -20°C ~ +48°C |
| Total luminous flux | 2700 lm |
| Equivalent wattage | 70 W |
| Light direction | Diffuse |
| Wattage | 18 W |
Key specifications
| IP rate | IP20 |
|---|---|
| Output voltage | 60-80V DC |
| Output current | 240 mA |
| Operating-temperature | -20°C ~ +48°C |
| Total luminous flux | 2700 lm |
| Equivalent wattage | 70 W |
| Light direction | Diffuse |
| Wattage | 18 W |
| Powerfactor | >0.95 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
General
| EAN | 8720365447730 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 10 |
| Certifications | CE, RoHs, EMC, TÜV, LM80 |
| Warranty exemption | Not installed or used according to the manual |
Installation
| Connection voltage | 100-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Other specifications
| IK-Value | IK08 |
|---|
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Number of light points | 10 |
| Switching cycles | 100000 |
| Lumen per watt | 150 Lm/W |
| Energy label |  |
| Light color | Daylight white |
| Flickerfree | Yes |
| Light type | Direct |
| Beam angle | 140 ° |
| Lifespan | 30000 h |
| Dimmable | No |
| Socket | G13 - T8 |
| LB factor | L90B50 |
Color and material
| Color | White |
|---|---|
| Material | Aluminum, Polycarbonate (PC) |
| Diffuser material | Polycarbonate (PC) |
| Diffuser finishing | Milky |
Dimensions & weights
| Width | 26 mm |
|---|---|
| Height | 26 mm |
| Length | 1198 mm |
Packaging
| Packaging type | Tube |
|---|---|
| Packaging width | 31 mm |
| Packaging height | 31 mm |
| Packaging length | 1270 mm |
| Quantity in packaging | 1 |
| Quantity mastercarton | 25 |
| Packaging weight | 150 g |
Key specifications
| IP rate | IP20 |
|---|---|
| Output voltage | 60-80V DC |
| Output current | 240 mA |
| Operating-temperature | -20°C ~ +48°C |
| Total luminous flux | 2700 lm |
| Equivalent wattage | 70 W |
| Light direction | Diffuse |
| Wattage | 18 W |
Key specifications
| IP rate | IP20 |
|---|---|
| Output voltage | 60-80V DC |
| Output current | 240 mA |
| Operating-temperature | -20°C ~ +48°C |
| Total luminous flux | 2700 lm |
| Equivalent wattage | 70 W |
| Light direction | Diffuse |
| Wattage | 18 W |
| Powerfactor | >0.95 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
General
| EAN | 8720365447730 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 10 |
| Certifications | CE, RoHs, EMC, TÜV, LM80 |
| Warranty exemption | Not installed or used according to the manual |
Installation
| Connection voltage | 100-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Other specifications
| IK-Value | IK08 |
|---|
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Number of light points | 10 |
| Switching cycles | 100000 |
| Lumen per watt | 150 Lm/W |
| Energy label | |
| Light color | Daylight white |
| Flickerfree | Yes |
| Light type | Direct |
| Beam angle | 140 ° |
| Lifespan | 30000 h |
| Dimmable | No |
| Socket | G13 - T8 |
| LB factor | L90B50 |
Color and material
| Color | White |
|---|---|
| Material | Aluminum, Polycarbonate (PC) |
| Diffuser material | Polycarbonate (PC) |
| Diffuser finishing | Milky |
Dimensions & weights
| Width | 26 mm |
|---|---|
| Height | 26 mm |
| Length | 1198 mm |
Packaging
| Packaging type | Tube |
|---|---|
| Packaging width | 31 mm |
| Packaging height | 31 mm |
| Packaging length | 1270 mm |
| Quantity in packaging | 1 |
| Quantity mastercarton | 25 |
| Packaging weight | 150 g |
Downloads
10x LED Tube 120cm - Ballast - T8 G13 Fitting - 18 Watts 2700 lumens (150lm/W) - 6000K daylight white - Flicker-free - Replaces 70 Watts (70W/860) - Incl. Starter
Downloads
10x LED Tube 120cm - Ballast - T8 G13 Fitting - 18 Watts 2700 lumens (150lm/W) - 6000K daylight white - Flicker-free - Replaces 70 Watts (70W/860) - Incl. Starter
Review
Key specifications
| IP rate | IP20 |
|---|---|
| Output voltage | 60-80V DC |
| Output current | 240 mA |
| Operating-temperature | -20°C ~ +48°C |
| Total luminous flux | 2700 lm |
| Equivalent wattage | 70 W |
| Light direction | Diffuse |
| Wattage | 18 W |
| Powerfactor | >0.95 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
General
| EAN | 8720365447730 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 10 |
| Certifications | CE, RoHs, EMC, TÜV, LM80 |
| Warranty exemption | Not installed or used according to the manual |
Installation
| Connection voltage | 100-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Other specifications
| IK-Value | IK08 |
|---|
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Number of light points | 10 |
| Switching cycles | 100000 |
| Lumen per watt | 150 Lm/W |
| Energy label | |
| Light color | Daylight white |
| Flickerfree | Yes |
| Light type | Direct |
| Beam angle | 140 ° |
| Lifespan | 30000 h |
| Dimmable | No |
| Socket | G13 - T8 |
| LB factor | L90B50 |
Color and material
| Color | White |
|---|---|
| Material | Aluminum, Polycarbonate (PC) |
| Diffuser material | Polycarbonate (PC) |
| Diffuser finishing | Milky |
Dimensions & weights
| Width | 26 mm |
|---|---|
| Height | 26 mm |
| Length | 1198 mm |
Packaging
| Packaging type | Tube |
|---|---|
| Packaging width | 31 mm |
| Packaging height | 31 mm |
| Packaging length | 1270 mm |
| Quantity in packaging | 1 |
| Quantity mastercarton | 25 |
| Packaging weight | 150 g |