V-TAC - LED fluorescent fixture - 150 cm - IP65 waterproof - 2000lm - incl. 22 Watt LED fluorescent tube - 4000K Neutral White

An IP65 waterproof LED fluorescent fixture incl. 150cm fluorescent tube, for placement in humid conditions

This LED fluorescent fixture is fully IP65 waterproof and works under operating temperatures between -20 and +45 degrees Celsius. This also makes the lamp very suitable for placement in refrigerators, outdoors and other humid conditions. The fixture is finished with a special coating that protects the fixture against corrosion and oxidation. The fluorescent lamp is equipped with a PG11 cable gland, so that the lamp fitting remains watertight. Guaranteed long life, even in the most humid conditions.

Product benefits

• Exchangeable LED tube: Because the LED tube in the fixture is exchangeable, you don't have to purchase a whole new lamp in the event of a defect in the light source. You can easily change the fluorescent tube while it is hanging from the ceiling
• Special coating: Both the switchboard and the fittings and the outside are provided with a special coating. This coating protects the LED fluorescent lamp (and the connections) against corrosion and weathering
• Also works in low temperatures: The LED fluorescent lamp works under all weather conditions and temperatures (-20° ~ 45° C), so you can also use the lamp excellently in cellars, cold stores and outdoor areas
• Lasts up to 8 years: The LED tubes in this fixture have 20,000 burning hours. When you have the LED fluorescent lamp on 250 days a year for 10 hours a day, the lamp will last up to 8 years
• Efficient: The fluorescent lamp consumes only 22 Watt and produces 2000 lumens. As a result, the LED tubes have an efficiency of 90.9 lumen per watt
• Bright light: The fixture shines a 4000K neutral white light. As a result, the luminaire illuminates spaces effectively and without shadows
• Plug and Play: The lamp can be connected directly to the 230 Volt mains (without transformer) and the fixture is supplied completely ready for installation
• Linkable: By means of the connection glands you can easily connect multiple LED TL fixtures to each other. This way you can operate it with one light switch
• 100% Flicker free: As a result, no fatigue, headaches or other complaints. This makes the LED fluorescent fixture also suitable for stables
• IP65 waterproof: The fixture is both waterproof and dustproof, so you can use the lamp in both dry and damp rooms
• Sensor ready: You can connect a sensor to this LED fluorescent fixture without any problems. Think of a motion sensor or twilight switch
• Certificates: The LED fluorescent fixture has been tested extremely carefully and therefore has all important certificates: CE, EMC, RoHS

4000K neutral white light

This LED fluorescent fixture shines a bright neutral white light. This 4000 Kelvin light color replaces the traditional 840 color. You choose the light color when you want to illuminate a room well and brightly. Neutral white is widely used in:

• Garages
• To sand
• Workshops
• warehouses
• Stores

Objects illuminated by this light color retain their natural colors.

For every location

Whether it is a damp, dry or cold or warm room, this LED fluorescent fixture is always available. This is due to its high IP65 protection class. This protection ensures that the fixture is watertight and dustproof. The operating temperature of -20 to 45 degrees ensures that the fluorescent lamp can also be used in very cold rooms. Think of cold stores or freezers.

Linkable

You can easily connect multiple LED fluorescent fixtures in series via the handy connection glands. By connecting the fixture in series, you can connect multiple fixtures with one light switch or sensor. In principle, you can connect an unlimited number of LED fluorescent fixtures. Make sure you use a thick cable for this. Thin cables will burn out on many fixtures connected in series.

As a rule of thumb you can use the following:

• 2.5mm2: maximum 16 Ampere
• 1.5mm2 maximum 10 amps
• 0.75mm2 maximum 6 amps

To convert this to wattage, multiply the amps by the voltage. So this means:

• 2.5mm2: 16 amps 230V= 3680 Watts (3680/39.9= 92 fixtures)
• 1,5mm2: 10 amps 230V= 2300 Watts (2300/39.9= 57 fixtures)
• 0.75mm2: 6 amps 230V= 1380 Watts (1380/39.9= 34 fixtures)

Then you divide the total wattage (incl. return power factor) by the wattage of the LED fluorescent fixture. As you can see, you can connect 57 fixtures on a 1.5m2 cable.

• 0.75m² installation cable
• 1.5 m² installation cable

Supplied fully assembled

This LED fluorescent fixture including fluorescent tube is supplied completely ready for installation. This means that you can immediately start installing it on the day the postman is at your door.

Interchangeable LED Tubes

The LED fluorescent tubes in this fixture are easy to change. You do not have to remove the fixture from the ceiling for this, because the hood is easy to open using the clamps on the side of the fixture. You can then change the fluorescent tubes in no time at all. That way you don't have to replace the entire fixture in the event of a defect in the light source.

• 1x LED fluorescent fixture IP65 waterproof
• 1x LED fluorescent tube
• 4x plugs
• 4x screws
• 2x mounting clamps