- All products are added to your cart.
HOFTRONIC™ - 25x LED T8 tube 60 cm 9 Watt 1170lm 3000K Flicker Free 130lm/W






- Article number: 554535
INTOLED delivery time
Delivery time
We do everything to deliver the ordered items to you on time. In some cases, circumstances may cause a delivery to be delayed. If this is the case, please contact our customer service.
-
Specifications
Input power: 100-240V AC Watts: 9 Watt Equivalent watts: 25 Watt Luminous flux: 1170 Lumen Light color: Warm white Color temperature: 3000K Color rendering index (CRI): 90 LB factor: L90B50 Beam angle: 320° Powerfactor: >0.9 Energy label: A++ Energy label new: E IP-rate: IP20 Dimmable: No Material: Fire-proof nanoplastic V0 Dimensions: 588 x 26 mm Operation temperature: -25° ~ 50° C Switching cycles: 100.000 cycles Life span: 30,000 hours Certification: CE, EMC, RoHS, LM80 Warranty: 3 years EAN: 7439628554535 -
Product description
25x LED T8 tube 60 cm 9 Watt 1170lm 3000K Flicker Free 130lm/W
Start saving energy right away with this 60 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
- Downloads
25x LED T8 tube 60 cm 9 Watt 1170lm 3000K Flicker Free 130lm/W
Start saving energy right away with this 60 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
Input power: | 100-240V AC |
Watts: | 9 Watt |
Equivalent watts: | 25 Watt |
Luminous flux: | 1170 Lumen |
Light color: | Warm white |
Color temperature: | 3000K |
Color rendering index (CRI): | 90 |
LB factor: | L90B50 |
Beam angle: | 320° |
Powerfactor: | >0.9 |
Energy label: | A++ |
Energy label new: | E |
IP-rate: | IP20 |
Dimmable: | No |
Material: | Fire-proof nanoplastic V0 |
Dimensions: | 588 x 26 mm |
Operation temperature: | -25° ~ 50° C |
Switching cycles: | 100.000 cycles |
Life span: | 30,000 hours |
Certification: | CE, EMC, RoHS, LM80 |
Warranty: | 3 years |
EAN: | 7439628554535 |
25x LED T8 tube 60 cm 9 Watt 1170lm 3000K Flicker Free 130lm/W
Start saving energy right away with this 60 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
Related products

T8 LED luminaire 60 cm IP20 for dry rooms single version suitable for one tube

T8 LED luminaire 60 cm IP20 for dry rooms double version suitable for two tubes

Installation cable Xtrem 3x1.5mm² suitable for indoor and outdoor 25m
Connector 50 pcs 3 pole