• All products are added to your cart.

LED Light hose end caps

LED Light hose end cap per 10 pieces for 60 LEDs
Matt. plastic
Packed per 10 pieces
Sealing cap end
Suitable for single-colour LED strips
4,90
Incl. 21% VAT
In stock
LED Strip Light RGB end cap per 10 pieces for Flex60 Series
Matt. plastic
Packed per 10 pieces
Sealing cap end
Suitable for Flex60 series RGB
6,95
Incl. 21% VAT
In stock
LED Light hose end cap per 10 pieces for Flex60 Series
Matt. plastic
Packed per 10 pieces
Sealing cap end
Suitable for Flex60 series
4,95
Incl. 21% VAT
In stock
LED Light hose end cap per 10 pieces for 180 LEDs
Matt. plastic
Packed per 10 pieces
Sealing cap end
Suitable for single-colour LED strips
4,90
Incl. 21% VAT
In stock
LED Light hose end cap per 10 pieces - RGBW
Matt. plastic
Packed per 10 pieces
Sealing cap end
Suitable for RGB LED strips
6,90
Incl. 21% VAT
In stock
* Incl. tax Excl. Shipping costs

LED light strip sealing caps

With the LED light strips from INTOLED you can be as creative as you want to be. You can place them under your bed in the bedroom, under the kitchen cupboards, or perhaps in the bathroom or outside on the terrace. For humid rooms and outdoor environments, it is recommended that you take the watertightness of the LED strips into account. The LED strips of INTOLED are jetproof, with an IP value of IP65. However, they are no longer watertight at the ends when you shorten the LED strip. If you do make them waterproof, it is useful to use sealing caps, also called end caps.

Various sealing caps for LED strips

When you take a look at the range of LED light strips at INTOLED, you will notice that there are several variants. They not only differ in colour, but also in the number of LEDs per meter. The LED strips with 60 LEDs per meter need sealing caps for 60LEDs/m, and the LED strips with 180 LEDs per meter need sealing caps for 180LEDs/m. In addition, there are also the sealing caps especially for the RGB LED strips. You can find them all on this page.

Mounting material at INTOLED

When you take a look at the accessories of the LED strips, you will find all kinds of different products to make mounting your LED strips a lot easier. For example, sealing caps are used to make your LED strips waterproof. If you want to connect multiple LED strips to each other, you will need connectors. If you want to mount your LED strips properly and securely, you can use mounting clamps. These are useful when, for example, you want to mount a light strip to a ceiling. Controllers and power supplies are also available at INTOLED.

Want to order sealing caps?

Are you looking for sealing caps for your LED light strips? Then be sure to have a look at the sealing caps on this page. They often come in handy! If you have any questions about the sealing caps or one of our LED products, you can always contact our customer service. You can reach our LED specialists by calling +31 (0)85 303 0027 or sending an e-mail to [email protected].