F01 IP66 LED Fixture 120cm - Adjustable light output and light colour - built-in LED chips
This F Series LED luminaire is a very unique LED luminaire. The luminaire is fully equipped with built-in LED chips, making the luminaire complete. When you buy a 120cm F01 IP66 luminaire, you no longer need to order a separate LED fluorescent tube. The F01 LED luminaire is not only unique for its high light output and low energy consumption, but also for its versatility.
Product benefits
- Built-in LED chips: This fluorescent tube has built-in LED chips, so there is no need to buy tubes.
- Adjustable wattage: You can adjust the lamp to 25, 30, 35 and 40 watts. So you can decide how much light output you want.
- Adjustable light colour: You can also set the lamp in 3 white tones. 3000K warm white, 4000K neutral white and 5000K daylight white.
- IP66 waterproof and dustproof: The F01 fluorescent lamp is waterproof and dustproof. This means it can be installed in damp locations.
- 50,000 hours lifetime: The lamp has a very high number of operating hours. With average consumption, the lamp will last at least 20 to 25 years.
- 120 degree beam: The 120-degree beam angle distributes light evenly throughout the room.
- Includes clips for ceiling mounting: 2 mounting clips, screws and dowels are included. So you can start hanging immediately.
Adjustment possibilities in wattages
What is special about the F01 IP66 luminaire is that you have the possibility to choose from multiple wattages. The F01 IP66 luminaires can be set in 25 Watt, 30 Watt, 35 Watt and 40 Watt. You do this by means of small switches on the inside of the fixture, which you reach by unscrewing the cap. Depending on the ceiling height of the room and the desired light output, you set the wattage.
High Lumen light output of high quality
The F01 IP66 LED luminaires 120cm have a high luminous flux of 120 to 130 lumens per watt. A high light output at low energy consumption. This makes the F01 LED luminaires a very energy efficient and durable LED product. The built-in LEDs are of high quality and contribute to the long lifespan of an average of 50.000 burning hours.
The F01 IP66 LED luminaires have a large beam angle of 120°. This ensures that the light is well distributed. The light is diffuse, thanks to the milky shade. This ensures pleasant and pleasant light in the room, but above all it ensures that you are not blinded.
Adjust the colour temperature
The setting options do not stop at the wattage. The colour temperature of the F01 IP66 LED luminaires can also be adjusted. This button can also be found on the inside of the luminaire, by clicking the cap of the fixture. The colour temperatures you can adjust are 3000K warm white light, 4000K neutral white light and 5000K daylight white.
Installing the F01 IP66 120cm LED luminaires
With the F01 IP66 120cm LED luminaires the application possibilities are very large. The F01 LED luminaires have a protection degree of IP66 and are therefore waterproof. The F01 IP66 LED luminaires are therefore not only suitable for dry rooms, but also for humid rooms. You can easily hang them up in supermarkets, sports facilities, car parks, petrol stations, station halls or office buildings.
We advise you to order an F series mounting kit when purchasing all F series LED fixtures. With this kit you can quickly and easily install your F series LED fixtures. You can mount the F01 LED luminaires directly to the ceiling, or hang them under the ceiling. Always make sure that before mounting the F01 IP66 LED fixtures you switch off the electricity for safety reasons.
The F01 IP66 LED luminaires 120cm are equipped with an driver. Adding an extra driver is therefore not necessary. If you want to mount several F01 LED luminaires in a room, you have the possibility to connect a number of F01 fixtures to each other.