HOFTRONIC™ - Dimmable LED Light Strip 5m RGB 60 LEDs/m IP65 Plug & Play - Flex60 Series

This complete LED light hose RGB will be delivered including mains adapter with EU plug, RF Remote controller including battery and 1 end cap. Use this beautiful dimmable LED light hose if you want to create more atmosphere in your home or outside your house. This LED light tube of 5 meters long can be used in many ways in your bedroom, bathroom, living room, hallway or under your bed. Because of the IP65 certification you can also use this light hose outdoors or in humid rooms. This is very handy when you want to create a cosy atmosphere around your house or garden with a Plug & Play light tube.

Dimmable

You can dim this LED Strip and change it to any RGB colour by using the supplied LED Strip remote control. With this controller, you can dim the led strip and change the colour up to a distance of 30 metres with the remote control. So you can always easily set the right brightness and light colour using the supplied controller!

Advantages RGB LED light hose Flex60 Series

• No less than 50,000 burning hours
• Light output 22 Lumens per LED
• Low consumption of 12 Watt per meter
• Setting RGB colours with included RF remote control
• UV-resistant: provides years of pleasure because the led strip cover does not change its colour with the amount of sunshine that shines on it
• Plug & Play installation: This LED light hose can be connected directly to the mains with the included main power supply, you don't need a transformer. The flat light strip is fully Plug & Play made which makes the installation very easy.
• The light hose can be cut every 1 metre by means of a marked cutting strip. Please note, if you want to shorten the LED strip, we advise you to purchase a sealing cap. This ensures that the cut-off end is watertight.

Important information for outdoor installation!

The power supply unit has an IP65 protection class, which means that it is suitable for use outdoors and in a dry indoor area. The block on the power supply unit must not be covered with tape etc. This will close off the ventilation holes and prevent it from ventilating sufficiently.

Mounting material

The LED light hose is supplied with a power supply, remote controller and 1 end cap. If you still want to order a few extra end caps, you can do so below by clicking on the link below. We also advise you to order mounting clips if you want to mount the LED light hose on a wall/ceiling. This will ensure that you go through the assembly without any worries and that you connect everything according to the instructions. 

• Sealing cap - for a watertight shortening of the light hose.
• Mounting clips - for mounting the light hose.
• Power supply - if you want a spare power supply you can press this link to order it.
• IP65 splash-proof junction box - to protect the mains power supply against moisture (recommended for severe weather conditions).