V-TAC - LED Solar Lamp White 3 Watt 4000K Neutral white with motion sensor

LED Solar Lamp White 3 Watt 4000K Neutral white with motion sensor

The LED Solar Wall Lamp is a popular solar lamp due to its multifunctional options including the front and rear lighting. The different options make the use very functional and ensure an ultimate user experience, because you can adjust the lamp to your own needs. In addition to the various functions of the solar wall lamp, this 3 Watt solar lamp has a particularly high light output of 400 lumens, so you are sure that you have enough light. The great thing about this Solar lamp is that it is fully IP65 waterproof, so you can mount the wall lamp completely carefree outside on the wall.

The Solar lamp radiates light to two sides, namely the front and rear. At the rear of the lamp are 2 LEDs which provide indirect lighting at the rear against the wall. This indirect lighting at the rear lights continuously in the dark thanks to the built-in twilight switch. If the LED Solar Wall Light detects movement with its motion sensor, the direct lighting on the front of the wall light will illuminate. The motion sensor has a minimum range of 2 meters and can go up to 6 meters with a detection angle of 120°, so it detects precisely on time so that the lighting comes in handy.

Charging this solar lamp is very simple and you only need 1 thing for that, because that is sunlight. The lamp is equipped with a solar panel and a Lithium battery which together ensure that the sunlight is stored in the battery of the lamp.

4 Light modes

The Solar Wall Light 3 Watt has 4 different light settings which can be set at the rear of the lamp.

1. At dusk, the LEDs on the front and back automatically switch to a dimmed setting. The motion sensor is not activated and the solar light switches off automatically after 5 hours.
2. In twilight, the LEDs at the front and back automatically switch on in a dimmed state. The motion sensor is activated and if movement is detected, the solar light at the front switches on at 100% brightness for 20 seconds.
3. The twilight switch has not been activated, which means that the solar light does not switch on automatically at dusk. The motion sensor is activated and upon detection of movement, the solar lamp at both the back and the front will switch on 100% brightness for 30 seconds.
4. The twilight switch and motion sensor are not activated so the lamp does not light up. The lamp is completely switched off but still uses the charging system.