HOFTRONIC™ - LED T8 (G13) tube 120 cm - 18 Watt - 2520 Lumen - 6000K replaces 65W (65W /860) Flicker-free - 140lm/W

LED T8 (G13) fluorescent tube of 120 cm - 18 Watt flicker-free free (Replaces 65 Watt - 65W/860) gives 2520 Lumen - 140lm/W - 6000K Daylight white light, starter included 

This LED T8 tube is manufactured from the highest quality materials and equipped with high lumen LED chips. The uniqueness of this LED tube is the high light output of 140 Lumen per Watt, this ensures low consumption and a high light output of 2520 Lumen. By replacing your traditional fluorescent tubes with this high lumen LED tube, you will immediately start saving money and you will have a higher light output. This LED tube can be replaced one-on-one with your current fluorescent tubes without modifying your current fixture, which means that no installer is needed.

Flicker-free unique patented design

The LED tube has a unique design in which only the highest quality components are used to guarantee unique quality. This LED tube has a patented design which provides an elegant appearance, the housing is made of pure 6063 aluminum and plastic which ensures that there is excellent heat dissipation. The plastic ensures a uniform light distribution. Due to the unique internal structure and high quality components such as a Japanese Rubycon capacitor, where the internal heat generation is up to 91% less than the standard LED tubes. This combination ensures that this LED tube has a guaranteed long life span of 50,000 hours. 

Due to the unique internal structure and high quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz. This means that the light blinks 50 to 60 times per second, with our brains noticing that it is not a stable light, unconsciously the brains have to continuously adjust this, which can cause complaints of fatigue and headaches.

Installation

For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.

If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter. 

In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.

Product Advantages

• Patented Design & Flicker-Free Technology
• Pure 6063 aluminium for improved heat dissipation
• Fits perfectly in traditional luminaires
• Easy installation
• Long life 50,000 hours & 5 year warranty
• Including LED Starter