- All products are added to your cart.
HOFTRONIC™ - LED T8 (G13) tube 150 cm - 24 Watt - 2640 Lumen - 4000K replaces 58W (58W/840) Flicker-free - 110lm/W
- Article number: 5423529
INTOLED delivery time
Delivery time
We do everything to deliver the ordered items to you on time. In some cases, circumstances may cause a delivery to be delayed. If this is the case, please contact our customer service.
-
Specifications
Input power: 100-240V AC Watts: 24 Watt Equivalent watts: 58 Watt Luminous flux: 2640 Lumen Light color: Neutral white Compatible with: Magnetic ballast Not compatible with: Electronic and High frequency ballast Color temperature: 4000K Color rendering index (CRI): >80 LB factor: L90B50 Beam angle: 320° Powerfactor: >0.9 Energy label: A+ Energy label new: E IP-rate: IP20 Dimmable: No Material: Fire-proof nanoplastic V0 Dimensions: 1498x26 mm Operation temperature: -25° ~ 50° C Switching cycles: 100.000 cycles Life span: 30,000 hours Certification: CE, EMC, RoHS, LM80 Warranty: 3 years EAN: 8720365423529 -
Product description
LED T8 (G13) fluorescent tube of 150 cm - 24 Watt flicker-free free (Replaces 58 Watt - 58W/840) gives 2640 Lumen - 110lm/W - 4000K Neutral white light, starter included
Start saving energy right away with this 150 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz. This means that the light blinks 50 to 60 times per second, with our brains noticing that it is not a stable light, unconsciously the brains have to continuously adjust this, which can cause complaints of fatigue and headaches.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
- Downloads
LED T8 (G13) fluorescent tube of 150 cm - 24 Watt flicker-free free (Replaces 58 Watt - 58W/840) gives 2640 Lumen - 110lm/W - 4000K Neutral white light, starter included
Start saving energy right away with this 150 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz. This means that the light blinks 50 to 60 times per second, with our brains noticing that it is not a stable light, unconsciously the brains have to continuously adjust this, which can cause complaints of fatigue and headaches.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
Input power: | 100-240V AC |
Watts: | 24 Watt |
Equivalent watts: | 58 Watt |
Luminous flux: | 2640 Lumen |
Light color: | Neutral white |
Compatible with: | Magnetic ballast |
Not compatible with: | Electronic and High frequency ballast |
Color temperature: | 4000K |
Color rendering index (CRI): | >80 |
LB factor: | L90B50 |
Beam angle: | 320° |
Powerfactor: | >0.9 |
Energy label: | A+ |
Energy label new: | E |
IP-rate: | IP20 |
Dimmable: | No |
Material: | Fire-proof nanoplastic V0 |
Dimensions: | 1498x26 mm |
Operation temperature: | -25° ~ 50° C |
Switching cycles: | 100.000 cycles |
Life span: | 30,000 hours |
Certification: | CE, EMC, RoHS, LM80 |
Warranty: | 3 years |
EAN: | 8720365423529 |
LED T8 (G13) fluorescent tube of 150 cm - 24 Watt flicker-free free (Replaces 58 Watt - 58W/840) gives 2640 Lumen - 110lm/W - 4000K Neutral white light, starter included
Start saving energy right away with this 150 cm LED T8 fluorescent tube, by replacing your traditional fluorescent tubes with this LED tube you can save up to 80% on your energy costs. This LED tube is very suitable and can be mounted without any modification in a LED fixture or conventional fluorescent fixture. This means that no installer is needed.
Flicker-free unique patented design
The LED tube has a unique design in which the components in the fire resistant cover are processed and thus separated from the tube (nanoplastic and LEDs) so that a long life of 30,000 hours is guaranteed. The cover caps are made of fire-resistant plastic, which protects them against high temperatures. Due to the unique internal structure and high-quality components, this tube is flicker-free, which is very important when switching to LED. Traditional fluorescent lighting and standard LED fluorescent tubes are not flicker-free and operate at 50-60 Hertz. This means that the light blinks 50 to 60 times per second, with our brains noticing that it is not a stable light, unconsciously the brains have to continuously adjust this, which can cause complaints of fatigue and headaches.
Installation
For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.
If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter.
In short, this tube can be used in any situation, this is ideal to replace your current fluorescent tubes or if you want to fit LED fixtures with LED tubes.
Product Advantages
- Patented flicker-free technology
- V0 fire resistant and shatterproof nanoplastic
- Unique design for improved heat dissipation
- Fits perfectly in traditional luminaires
- Easy installation
- Long service life 30,000 hours
- Including LED Starter
Related products

10x LED T8 tube 150 cm 22 Watt 2640lm 4000K Flicker-free incl. starter

25x LED T8 tube 150 cm 24 Watt 2640lm 4000K Flicker-free incl. starter

LED Waterproof fixture IP65 150 cm Stainless steel Clips Linkable double version

LED Waterproof fixture IP65 150 cm Stainless steel Clips Linkable single version

T8 LED luminaire 150 cm IP20 for dry rooms double version suitable for two tubes

T8 LED luminaire 150 cm IP20 for dry rooms single version suitable for one tube