LED Tube 120 cm - T8 (G13) - 18 Watts - 3600 lumens - 200lm/W - High lumens - replaces 120 Watts (120W/860) - 6000K - flicker-free
Product information
LED Tube 120 cm - T8 (G13) - 18 Watts - 3600 lumens - 200lm/W - High lumens - replaces 120 Watts (120W/860) - 6000K - flicker-free
Product information
LED Tube 120 cm - T8 - 18W - 3600lm - 200lm/W - Highlm - 6000K - flicker-free
This economical 120cm LED Tube has an efficiency of 200 lumens per Watt. As a result, the LED tube consumes only 18 watts and produces 3600 lumens of light. The LED Tube shines a completely flicker-free light and is suitable for placement in T8 (G13) LED fluorescent lights. The LED tube shines a bright daylight white light of 6000 degrees Kelvin. This light colour replaces the traditional 860 light colour 1:1.
The LED tube is made of fire-resistant plastic (v0) and lasts no less than 54,000 hours. With average use, this equates to as much as 20 years. The lamp has a watertightness of IP20 (not waterproof). By placing it in a waterproof fixture, you can use the LED light in damp rooms without any problems. The LED tube is made of a matt plastic, so you cannot see the LED chips in the lamp and it shines a pleasant diffuse light.
• Save 85 % (200 lm/W)
The fluorescent tube shines 200 lumens per watt, which is efficient and gives more light with less power. As a result, you save 85% compared to old fluorescent lighting.
• Daylight white light colour - 6000K
Daylight white light colour that replaces the 860 light colour of a traditional fluorescent tube. This light colour is widely used in workshops, factories and warehouses.
• 54,000 burning hours (ca. 21.5 years)
With a lifetime of 54,000 burning hours, at 250 days a year and 10 hours a day, this lighting will last at least 21.5 years, meaning you won't have to worry about your lighting for 21.5 years to come!
• 3-year warranty
You will receive a comprehensive 3-year all-in guarantee on this LED Tube. Defective products will be replaced free of charge within these 3 years. Buy without worries.
• T8 fitting (G13)
The fluorescent tube has a T8 fitting. This is the same fitting as the old fashioned G13 fitting. You can therefore replace your current G13 tube 1:1 with this T8 tube.
• Flicker-free
The LED tube shines 100% flicker-free light. No complaints such as headaches, fatigue and nausea are prevented. Perfect for offices, workshops and schools.
• Suitable for magnetic ballast
For energy savings, connect the fluorescent tube directly to 220/230V. Works only with magnetic ballast, not electronic or high-frequency ballast.
• Powerfactor 0.90
This LED tube has a power factor of 0.9. As a result, this tube produces only 10 % blind current and you can connect many tubes in a group. Perfect for large projects.
LED Tube 120 cm - T8 - 18W - 3600lm - 200lm/W - Highlm - 6000K - flicker-free
This economical 120cm LED Tube has an efficiency of 200 lumens per Watt. As a result, the LED tube consumes only 18 watts and produces 3600 lumens of light. The LED Tube shines a completely flicker-free light and is suitable for placement in T8 (G13) LED fluorescent lights. The LED tube shines a bright daylight white light of 6000 degrees Kelvin. This light colour replaces the traditional 860 light colour 1:1.
The LED tube is made of fire-resistant plastic (v0) and lasts no less than 54,000 hours. With average use, this equates to as much as 20 years. The lamp has a watertightness of IP20 (not waterproof). By placing it in a waterproof fixture, you can use the LED light in damp rooms without any problems. The LED tube is made of a matt plastic, so you cannot see the LED chips in the lamp and it shines a pleasant diffuse light.
• Save 85 % (200 lm/W)
The fluorescent tube shines 200 lumens per watt, which is efficient and gives more light with less power. As a result, you save 85% compared to old fluorescent lighting.
• Daylight white light colour - 6000K
Daylight white light colour that replaces the 860 light colour of a traditional fluorescent tube. This light colour is widely used in workshops, factories and warehouses.
• 54,000 burning hours (ca. 21.5 years)
With a lifetime of 54,000 burning hours, at 250 days a year and 10 hours a day, this lighting will last at least 21.5 years, meaning you won't have to worry about your lighting for 21.5 years to come!
• 3-year warranty
You will receive a comprehensive 3-year all-in guarantee on this LED Tube. Defective products will be replaced free of charge within these 3 years. Buy without worries.
• T8 fitting (G13)
The fluorescent tube has a T8 fitting. This is the same fitting as the old fashioned G13 fitting. You can therefore replace your current G13 tube 1:1 with this T8 tube.
• Flicker-free
The LED tube shines 100% flicker-free light. No complaints such as headaches, fatigue and nausea are prevented. Perfect for offices, workshops and schools.
• Suitable for magnetic ballast
For energy savings, connect the fluorescent tube directly to 220/230V. Works only with magnetic ballast, not electronic or high-frequency ballast.
• Powerfactor 0.90
This LED tube has a power factor of 0.9. As a result, this tube produces only 10 % blind current and you can connect many tubes in a group. Perfect for large projects.
Key specifications
All specifications
Key specifications
| IP rate | IP20 |
|---|---|
| Operating-temperature | -20°C ~ +40°C |
| Total luminous flux | 3600 lm |
| Wattage | 18 W |
| Powerfactor | >0.90 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
Key specifications
| IP rate | IP20 |
|---|---|
| Operating-temperature | -20°C ~ +40°C |
| Total luminous flux | 3600 lm |
| Wattage | 18 W |
| Powerfactor | >0.90 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
Installation
| Connection voltage | 220-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Switching cycles | 30000 |
| Lumen per watt | 200 Lm/W |
| Energy label |  |
| Light color | Daylight white |
| Flickerfree | Yes |
| Beam angle | 220 ° |
| Lifespan | 54000 h |
| Dimmable | No |
| Socket | G13 - T8 |
Color and material
| Color | White |
|---|---|
| Material | Nanoplastic / PC |
General
| EAN | 8720722729059 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 1 |
| Certifications | CE, RoHs, EMC |
| Warranty exemption | Not installed or used according to the manual |
Packaging
| Packaging width | 36 mm |
|---|---|
| Packaging height | 36 mm |
| Packaging length | 1262 mm |
| Quantity mastercarton | 25 |
Dimensions & weights
| Width | 28 mm |
|---|---|
| Height | 28 mm |
| Length | 1212 mm |
Key specifications
| IP rate | IP20 |
|---|---|
| Operating-temperature | -20°C ~ +40°C |
| Total luminous flux | 3600 lm |
| Wattage | 18 W |
| Powerfactor | >0.90 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
Key specifications
| IP rate | IP20 |
|---|---|
| Operating-temperature | -20°C ~ +40°C |
| Total luminous flux | 3600 lm |
| Wattage | 18 W |
| Powerfactor | >0.90 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
Installation
| Connection voltage | 220-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Switching cycles | 30000 |
| Lumen per watt | 200 Lm/W |
| Energy label | |
| Light color | Daylight white |
| Flickerfree | Yes |
| Beam angle | 220 ° |
| Lifespan | 54000 h |
| Dimmable | No |
| Socket | G13 - T8 |
Color and material
| Color | White |
|---|---|
| Material | Nanoplastic / PC |
General
| EAN | 8720722729059 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 1 |
| Certifications | CE, RoHs, EMC |
| Warranty exemption | Not installed or used according to the manual |
Packaging
| Packaging width | 36 mm |
|---|---|
| Packaging height | 36 mm |
| Packaging length | 1262 mm |
| Quantity mastercarton | 25 |
Dimensions & weights
| Width | 28 mm |
|---|---|
| Height | 28 mm |
| Length | 1212 mm |
Downloads
LED Tube 120 cm - T8 (G13) - 18 Watts - 3600 lumens - 200lm/W - High lumens - replaces 120 Watts (120W/860) - 6000K - flicker-free
Downloads
LED Tube 120 cm - T8 (G13) - 18 Watts - 3600 lumens - 200lm/W - High lumens - replaces 120 Watts (120W/860) - 6000K - flicker-free
Review
Key specifications
| IP rate | IP20 |
|---|---|
| Operating-temperature | -20°C ~ +40°C |
| Total luminous flux | 3600 lm |
| Wattage | 18 W |
| Powerfactor | >0.90 |
| Frequency | 50/60Hz |
| Workingvoltage | 230 V |
Installation
| Connection voltage | 220-240V AC |
|---|---|
| Suitable for indoor outdoor | Indoor |
Light source
| CRI | >80Ra |
|---|---|
| Colour temperature | 6000K |
| Switching cycles | 30000 |
| Lumen per watt | 200 Lm/W |
| Energy label | |
| Light color | Daylight white |
| Flickerfree | Yes |
| Beam angle | 220 ° |
| Lifespan | 54000 h |
| Dimmable | No |
| Socket | G13 - T8 |
Color and material
| Color | White |
|---|---|
| Material | Nanoplastic / PC |
General
| EAN | 8720722729059 |
|---|---|
| Brand | HOFTRONIC |
| Warranty | 3 year |
| Quantity | 1 |
| Certifications | CE, RoHs, EMC |
| Warranty exemption | Not installed or used according to the manual |
Packaging
| Packaging width | 36 mm |
|---|---|
| Packaging height | 36 mm |
| Packaging length | 1262 mm |
| Quantity mastercarton | 25 |
Dimensions & weights
| Width | 28 mm |
|---|---|
| Height | 28 mm |
| Length | 1212 mm |