HOFTRONIC™ - Tube lights - Tube LED light - 120cm - Incl. flickerfree 18W fluorescent tube - 6000K cold white light - IP65 waterproof - Connectable - Fluorescent Lighting

A complete 120cm fluorescent tube with a LED fixture including an 18 Watt tube LED light that shines a cold white light of 6000K

Looking for a complete LED fluorescent lamp of 120cm? Then choose this LED fluorescent fixture from HOFTRONIC. This popular LED fluorescent lamp is delivered complete with LED fluorescent tubes. By means of the dropdown at the shopping cart button you can choose the desired efficiency. You can choose from:

• 18 Watt - 1980 lumens (110lm/W) - Replaces 36W fluorescent lamp (50% savings)
• 18 Watt - 2520 Lumen (140lm/W) - replaces 46W fluorescent lamp (61% saving)
• 18 Watt - 2880 Lumen (160lm/W) - Replaces 52W fluorescent lamp (64% saving)
• 18 Watt - 3150 Lumen (175lm/W) - Replaces 57W fluorescent lamp (70% saving)

All tubes emit a daylight white light of 6000 degrees Kelvin. This light colour replaces the traditional 860 light colour.

Product benefits

• Flicker-free: The LED fluorescent tube in the fixture is completely flicker-free. This prevents complaints such as headaches, fatigue and loss of concentration. Perfect for offices, warehouses and other workplaces
• Made of ABS+Polycarbonate: Both plastics have a high resistance to chemical vapours. As a result, the LED fluorescent luminaires retain their long service life and do not become porous in areas where chemical vapours are common, such as garages and factory halls
• IP65 waterproof: The LED TL fixture is completely seamlessly finished and equipped with water-repellent rubbers. This gives the fixture an IP65 protection class. This means that the LED fluorescent lamp cannot fail due to moisture and dust
• Also for cold stores: This fluorescent ceiling light works under almost all temperatures (from -5 to 45 degrees). This makes it also suitable for cold stores
• Stainless steel clips: The hood is fixed to the base by means of stainless steel clips. Therefore there is no chance of rust or plastic fatigue
• High power factor: The LED fluorescent tubes in the fixture have a high power factor of 0.9. This ensures that little power flows back to the connected group. This allows you to connect many more LED fluorescent fixtures to one group
• Interchangeable light source: The LED fluorescent tubes from the fixture are interchangeable. This means that if the light source is defective you do not have to replace the entire fixture
• Linkable: By means of the connection glands on the side of the fixture, the tubes can be linked together. This allows you to operate multiple fixtures with one switch
• Daylight bright white light: The tubes in the fixture shine a 6000K daylight white light. This light colour replaces the traditional 860 light colour
• Supplied ready to install: With the fixture you receive all the necessary materials to hang the lamp. These include screws, plugs and mounting clips
• Extremely long life: The tubes in this fixture have a life of 30,000 hours. With average use (250 days a year, 10 hours a day), this amounts to 12 years
• Guarantee: You receive a standard 3-year guarantee on both the tube and the fitting. Defects will be replaced free of charge within these 3 years. Buy without worries

LED fluorescent fixture 120cm with high efficiency

By means of the dropdown on this product you can easily choose the efficiency of the fixture. This choice is mainly influenced by the desired amount of light (lumen) and thus the size of the room. For large warehouses we recommend the 175 lumens per watt LED tubes. For smaller warehouses and workplaces we recommend the 130 lumens per watt version. Obviously this also depends on the desired amount of light.

LED fluorescent tubes with 0.9 power factor

Due to the high power factor of 0.9, this LED tube is very suitable for large projects. Because of this power factor, much less current flows back to the group to which it is connected. Imagine you can connect 3,680 Watt to a group. With a LED tube of 10 Watt and a power factor of 0.5 (whereby 50% of the consumption flows back to the group) you can connect 245 tubes to this group. When you choose a LED tube with a power factor of 0.90 (with this, 10 percent flows back) and a consumption of 10 Watts, you can connect 334 tubes to this group. This makes this LED fluorescent fixture very suitable for larger installations and projects.

6000K daylight white light

This LED fluorescent fixture shines with a light colour of 6000K daylight white light. This bright light colour is very suitable for illuminating workshops, warehouses, offices and garages. The light colour replaces the traditional 860 light colour one to one.

Easy installation

Mounting this LED TL fixture is very easy thanks to the supplied stainless steel mounting clips. You simply screw them onto the ceiling and click the fixture onto them. You can connect the fixture directly to 230 Volts. You do not need a transformer or driver for this.

In the package you will find all the necessary mounting materials to hang the LED fluorescent fixture. You will find the following items in the package. This way, you can immediately start installing your new LED fluorescent light on the day that the postman arrives at your door.

Made from high-quality material

Both the LED fluorescent fixture and the LED tube are made of high quality ABS + Polycarbonate. This makes the LED fluorescent fixture last a long time. In addition, this makes it resistant to impact damage. This makes the fixture also very suitable for warehouses.

HOFTRONIC

This LED fluorescent fixture was made by the lighting brand HOFTRONIC. HOFTRONIC is both a manufacturer and a seller of LED lighting. This allows you to benefit from the best price, highest quality and best warranty conditions. On this LED fluorescent fixture you will receive 3 years warranty. 

• 1x HOFTRONIC fluorescent fixture
• 1x LED T8 Nano tube
• 4x plugs
• 4x screws
• 2x stainless steel mounting clips