Philips LED Panel transformer - 36 Watts - Philips Certadrive - DC connector - LED transformer - IP20 for indoor use
Product information

Philips LED Panel transformer - 36 Watts - Philips Certadrive - DC connector - LED transformer - IP20 for indoor use
LED Panel driver - 36W - Philips Certadrive - DC connector - LED transformer - IP20
This transformer is suitable for all HOFTRONIC LED Panels 36 Watt 125lm/W, 60x60 cm and 30x120 cm. The transformer comes standard with the LED Panels, so this transformer does not need to be purchased separately with the panels. This loose LED Panel transformer is for when you want to buy a spare transformer in case something would ever happen to the supplied transformer. The LED panel transformer comes with about 15 cm of cable on the input side, which is already connected to the transformer.
This cable is supplied with an open end, so you need to connect it to the mains with a connector, wago clamps or Wieland plug.
• Plug & play
The LED transformer is easy to connect and is supplied ready to install. If you wish to install this transformer outdoors, place it in an IP65 waterproof junction box.
• Suitable for 125 lm/W LED panels
The transformer or driver converts the 220/230V mains supply to the voltage required for the LED panel. The driver is completely plug and play.
• Flicker-free transformer
The transformer ensures that the light comes out of the lamp flicker-free. This prevents complaints such as headaches and fatigue. A must for workshops and offices.
• IP20 dustproof
This LED driver is IP20 dust-proof and therefore not waterproof. Would you like to use the LED driver in a damp room? Then place it in a waterproof junction box.
• Operating temperature -25 to 50 degrees
This transformer has an operating temperature between -25° and +50°C, suitable for just about every conceivable space, both very hot and very cold environments.
• 2 years warranty
You will receive a comprehensive 2-year all in warranty on this LED transformer. Within these 2 years, defective products will be replaced free of charge. Buying without worries.
LED Panel driver - 36W - Philips Certadrive - DC connector - LED transformer - IP20
This transformer is suitable for all HOFTRONIC LED Panels 36 Watt 125lm/W, 60x60 cm and 30x120 cm. The transformer comes standard with the LED Panels, so this transformer does not need to be purchased separately with the panels. This loose LED Panel transformer is for when you want to buy a spare transformer in case something would ever happen to the supplied transformer. The LED panel transformer comes with about 15 cm of cable on the input side, which is already connected to the transformer.
This cable is supplied with an open end, so you need to connect it to the mains with a connector, wago clamps or Wieland plug.
• Plug & play
The LED transformer is easy to connect and is supplied ready to install. If you wish to install this transformer outdoors, place it in an IP65 waterproof junction box.
• Suitable for 125 lm/W LED panels
The transformer or driver converts the 220/230V mains supply to the voltage required for the LED panel. The driver is completely plug and play.
• Flicker-free transformer
The transformer ensures that the light comes out of the lamp flicker-free. This prevents complaints such as headaches and fatigue. A must for workshops and offices.
• IP20 dustproof
This LED driver is IP20 dust-proof and therefore not waterproof. Would you like to use the LED driver in a damp room? Then place it in a waterproof junction box.
• Operating temperature -25 to 50 degrees
This transformer has an operating temperature between -25° and +50°C, suitable for just about every conceivable space, both very hot and very cold environments.
• 2 years warranty
You will receive a comprehensive 2-year all in warranty on this LED transformer. Within these 2 years, defective products will be replaced free of charge. Buying without worries.
Key specifications
Key specifications
IP rate | IP20 |
---|---|
Dimmer suitable for type lighting | LED |
Max wattage | 36 W |
Workingvoltage | 230 V |
Output voltage | 33-42V DC |
Output current | 900 mA |
Operating-temperature | -20°C ~ +40°C |
Frequency | 50/60Hz |
Key specifications
IP rate | IP20 |
---|---|
Dimmer suitable for type lighting | LED |
Max wattage | 36 W |
Workingvoltage | 230 V |
Output voltage | 33-42V DC |
Output current | 900 mA |
Operating-temperature | -20°C ~ +40°C |
Frequency | 50/60Hz |
Min wattage | 0 W |
Installation
Connectable | Yes |
---|---|
Ground wire | No |
Connection voltage | 220-240V AC |
Suitable for indoor outdoor | Indoor |
Cable with plug | No |
Dimmer including adapter | No |
Including coverplate | No |
Color and material
Color | White |
---|---|
Material | Plastic |
Other specifications
Dimming technique | 1-10V |
---|
Light source
Dimmable | Yes |
---|---|
Flickerfree | Yes |
General
EAN | 8720722703479 |
---|---|
Brand | Philips |
Warranty | 2 year |
Certifications | CE, RoHs, EMC, TÜV, SAA |
Warranty exemption | Not installed or used according to the manual |
Dimensions & weights
Width | 42 mm |
---|---|
Height | 28 mm |
Length | 135 mm |
Packaging
Packaging type | Box |
---|---|
Quantity in packaging | 1 |
Quantity mastercarton | 50 |
Key specifications
IP rate | IP20 |
---|---|
Dimmer suitable for type lighting | LED |
Max wattage | 36 W |
Workingvoltage | 230 V |
Output voltage | 33-42V DC |
Output current | 900 mA |
Operating-temperature | -20°C ~ +40°C |
Frequency | 50/60Hz |
Key specifications
IP rate | IP20 |
---|---|
Dimmer suitable for type lighting | LED |
Max wattage | 36 W |
Workingvoltage | 230 V |
Output voltage | 33-42V DC |
Output current | 900 mA |
Operating-temperature | -20°C ~ +40°C |
Frequency | 50/60Hz |
Min wattage | 0 W |
Installation
Connectable | Yes |
---|---|
Ground wire | No |
Connection voltage | 220-240V AC |
Suitable for indoor outdoor | Indoor |
Cable with plug | No |
Dimmer including adapter | No |
Including coverplate | No |
Color and material
Color | White |
---|---|
Material | Plastic |
Other specifications
Dimming technique | 1-10V |
---|
Light source
Dimmable | Yes |
---|---|
Flickerfree | Yes |
General
EAN | 8720722703479 |
---|---|
Brand | Philips |
Warranty | 2 year |
Certifications | CE, RoHs, EMC, TÜV, SAA |
Warranty exemption | Not installed or used according to the manual |
Dimensions & weights
Width | 42 mm |
---|---|
Height | 28 mm |
Length | 135 mm |
Packaging
Packaging type | Box |
---|---|
Quantity in packaging | 1 |
Quantity mastercarton | 50 |

Philips LED Panel transformer - 36 Watts - Philips Certadrive - DC connector - LED transformer - IP20 for indoor use
Review
Key specifications
IP rate | IP20 |
---|---|
Dimmer suitable for type lighting | LED |
Max wattage | 36 W |
Workingvoltage | 230 V |
Output voltage | 33-42V DC |
Output current | 900 mA |
Operating-temperature | -20°C ~ +40°C |
Frequency | 50/60Hz |
Min wattage | 0 W |
Installation
Connectable | Yes |
---|---|
Ground wire | No |
Connection voltage | 220-240V AC |
Suitable for indoor outdoor | Indoor |
Cable with plug | No |
Dimmer including adapter | No |
Including coverplate | No |
Color and material
Color | White |
---|---|
Material | Plastic |
Other specifications
Dimming technique | 1-10V |
---|
Light source
Dimmable | Yes |
---|---|
Flickerfree | Yes |
General
EAN | 8720722703479 |
---|---|
Brand | Philips |
Warranty | 2 year |
Certifications | CE, RoHs, EMC, TÜV, SAA |
Warranty exemption | Not installed or used according to the manual |
Dimensions & weights
Width | 42 mm |
---|---|
Height | 28 mm |
Length | 135 mm |
Packaging
Packaging type | Box |
---|---|
Quantity in packaging | 1 |
Quantity mastercarton | 50 |