Ecodim - Plug-in dimmer - LED - phase cut - 0-100 watt

Suitable for 0-100W

This Ecodim plug dimmer for LED lamps has a range of 0-100 Watts. There is a minimum load of 1 Watt to be connected to be able to dim. The dimmability goes up to 0%, provided that the dimmable LED driver in/of the LED lamp is sufficient. Furthermore, this plug dimmer is suitable for Halogen 5-200 watts. Furthermore, this plug dimmer is suitable for Halogen 5-200 watts.

Optimal dimmability & light stability

What makes this dimmer totally unique is the MIN/COARSE potentiometer. This makes it possible to manually set the light stability and dimmability in the lowest possible light setting. This way you get the highest possible dimmability from your LED lamps and prevents the lamps from blinking as soon as they are dimmed at the lowest light level. How to set this can be read under the heading 'Installation'.

Furthermore, this plug dimmer has a VDR (voltage dependent resistor) which ensures that fluctuations in the grid are absorbed. Thus, most fluctuations in the light are prevented.

Soft-start system

The soft-start system ensures that the LED lamps are gently switched on at the last used dimming setting - even in the low light level. This means that you will not see a flash or that the lamps do not have to go to 100% light setting before dimming. The last dimming setting is thus remembered and the next time the LED lamps are switched on, the light will go on gently at the last used setting.

Silent dimming

Thanks to the high quality of this electronic plug dimmer, all LED lamps (working on phase cut/tronic/RC) can be dimmed silently. No buzzing LED dimmer or LED lamps so!

Suitable for 90% of all LED lamps

Suitable led lamps for this socket dimmer are all led lamps (with or without transformer) that work on phase cutting (trailing edge/RC/tronic). These include the following brands of led lamps:

• Hoftronic
• IKEA
• Philips
• Osram
• Megaman
• Sylvania
• EcoBright
• Push / Turntable

By means of the push / turn button you can dim this LED plug dimmer. You press the button to turn the light on/off. By turning you can dim the light harder / softer.

Plug & Play!

Plug the dimmer into the outlet and the cord / Euro plug of your LED lamps in (the socket of) the plug dimmer ... and you can immediately dim! The led lamps blink or you can not dim far back? Adjust the MIN/COARSE potmeter. This is on the back of the dimmer. How this works, you can read at the tab "Installation".