HOFTRONIC™ - Set of 9 LED Gardenspike lights Spikey - 5 Watt - 400lm - 2700K - anthracite - IP65 waterproof - Incl. dimmer with remote control

Set of 9 LED Gardenspike lights Spikey - 5 Watt - 400lm - 2700K - anthracite - IP65 waterproof - Incl. dimmer with remote control

This LED gardenspike light is made of durable maintenance-free aluminium in the colour anthracite. Because this spotlight can be tilted, you can ideally illuminate trees, hedges, walls and buildings with the right light beam directed because the light head is 360° adjustable. This makes this beautiful spotlight very flexible in terms of set-up and applications. Thanks to the full aluminum housing and an IP65 protection degree, this spotlight is resistant to the harshest weather conditions (not suitable for underwater!).

Interchangeable light source and Suitable for Philips Hue GU10 spotlights

This spike light is also suitable to place a Philips Hue GU10 spotlight inside because they are larger than standard GU10 spotlights, they do not often fit but with our spike light light we have taken into account that the Philips Hue GU10 spotlights fit perfectly.

Easy installation

If you have little experience with installing lighting or ground spotlights then you don't have to worry about installing them. The installation is very easy, as the spot is already equipped with a GU10 fitting and already connected cable of 30 cm long. You only need to connect the ground spots to the power cable of the power supply by means of the waterproof cable connector, you don't need a transformer for this. Connecting the ground spots is now a piece of cake!

The spotlight is easy to install. Insert the ground stake in the desired location in the ground and connect the spotlight to it. Make sure that the power cable is first connected to the LED receiver, from the LED receiver you can further install the cable to the other spotlights. You can easily install the spotlight with more spots. For this you can use our waterproof cable connectors to connect the ground spots with each other. Connecting the garden spots is now a piece of cake! The LED receiver works with a RF chip which makes it possible to operate your lighting directly via the supplied remote control.

Please note that you always place the ground spot in a draining material more tips on how to connect garden lighting can be read on our Blog; 3 tips for landscaping garden lighting. 

Installation on a wall

The Spikey garden spike have a unique feature: the garden spike lights can also be mounted on a wall! To do this, you only need to loosen the spike, and then you can use 2 screws to mount the fixture on a wall. The fixture is tiltable, so the Spikey can serve as a spotlight.

What do you need to pay attention to when installing?

1. First, turn off the power of the groups you are going to work with!
2. Once the power is off, you can connect the wires to the wireless LED dimmer, connect the wires to the N (neutral) and L (life) points. From here, the power wires can be further connected to the outdoor lamps.
   Please note that the input voltage must not be other than 100-240V AC!
3. Once the outdoor lamps and the LED receiver are installed, the wireless remote control can be connected to the LED dimmer. You can do this very easily by first switching the power supply back on.
4. Now press 1 time briefly on the "Learn" button of the LED dimmer, then select a group on the remote and press "l" or "O" of the selected group. After this, the linked lamps will flicker once. This means that the installation was successful!