HOFTRONIC™ - 10x LED T5 (G5) tube 115 cm - 18 Watt - 2520 Lumen - 6000K replaces 65W (65W/840) Flicker-free - 140lm/W

LED T5 (G5) fluorescent tube of 115 cm - 18 Watt flicker-free free (Replaces 65 Watt - 65W/840) gives 2520 Lumen - 140lm/W - 6000K daylight white light, extra suitable for your garage

With the T5 LED fluorescent tube with a consumption of only 18 Watt you opt for economy. With a length of 115 cm and a powerful light intensity of 2520 lumen, this completely flicker-free LED fluorescent tube is very suitable as lighting in your garage, storage room, office or garden house. The T5 fluorescent beam has a daylight white shining light color and is easy to connect to any old fluorescent fixture. Due to the high power factor of 0.95, you can connect a lot of tubes to one group. Ideal for larger projects!

Product features

• Extremely efficient: The LED tube consumes only 18 Watts and produces no less than 2520 Lumens. This allows you to enjoy a powerful efficiency of no less than 140 lumens per Watt. Due to the extremely low consumption of 18 Watt you save no less than 95% on your fluorescent lighting
• 20 years of fun The combination of the best LED chips and the sturdy aluminum ensures that with 50,000 burning hours you can enjoy the LED tube for 20 years. If you have the tube on for 250 days a year, for 10 hours a day, this equates to 20 years. So you never have to worry about your fluorescent lighting again.
• Handy T5 fitting: Thanks to the handy T5 fitting, you can easily install the LED tube in any traditional TL T5 fixture. As a result, you no longer need a new fluorescent fixture and you immediately enjoy the benefits of the energy-efficient LED tubes
• Bright daylight white light color: The daylight white 6000K light color provides clear white lighting for your desk, workshop or garden house. The daylight white light color identically replaces the traditional 860 light color. Due to the high quality of the T5 fluorescent tubes, the tube still retains 90% of the original bright daylight white light color after 15 years.
• Extra safe design: Due to the extra safe overvoltage protection, the tubes never break during an on/off switch or an overvoltage. The fluorescent LED bar is finished with a well-protected powder coating that ensures that the tube will not rust, discolor or become damaged.
• 100% flicker-free: The TL LED tube will certainly not give you a headache... With the TL LED tubes you will never be bothered by flickering fluorescent lighting again. This makes them extra suitable as lighting for your desk, workshop or garden house
• 140 degree beam angle: The narrow beam angle of 140 degrees ensures that your fluorescent LED lighting is specifically directed downwards. This means you no longer need a fluorescent fixture with reflectors, which is ideal
• Even distribution: The handy plastic part of the tube ensures that the tube has an even distribution of your light. As a result, you will never again be bothered by uneven light points on your fluorescent tube
• Made of the strongest aluminum: Due to the sturdy aluminum, the fluorescent tube can dissipate as much as 91% better than a plastic fluorescent tube. This way you can be sure that you will enjoy your fluorescent lighting for years to come
• Exclusive dummy starter: the T5 LED tubes can be easily connected to any fixture, so no dummy starter is needed anymore. This is therefore not included
• Very suitable for projects: The tube has a power factor of 0.95. This extra high power factor ensures that much less current flows back to the group, so that you can connect many more tubes to one group. Ideal for lighting larger spaces such as a hall, workshops or a large garage
• Isolated driver: Because the driver is safely insulated in the end cap of the LED tube, the heat from the driver cannot burn the LED chips in the tube. So extra safe!
• Safe transport: The fluorescent LED tubes are shipped in an extra thick and sturdy cardboard tube, which guarantees safe transport of your fluorescent tubes
• Equipped with all quality marks: This quality product has been extensively tested and therefore provided with all important quality marks: CE, EMC, ROHS, TÜV, LM80

Extremely efficient

The energy-efficient fluorescent LED tube consumes only 18 Watts and produces a light intensity of no less than 2520 lumens. This allows you to enjoy an extra high light output with an extra low consumption.

Extra safety

Due to the extra safe surge protection, the tubes will never fail again when switching on and off or during overvoltage. Due to the sturdy aluminum, the fluorescent LED tube can dissipate heat as much as 91% better than a plastic tube, so the internal components will always deliver top performance. The driver is safely insulated in the end cap of the fluorescent tube, this ensures that the heat production of the driver cannot affect the LED chips in the tube. In other words, the insulated manufacture of the driver ensures that the LED chips cannot be burned by the heat from the driver. The fluorescent tube is finished with a high-quality powder coating that ensures that the tube will not rust, discolour, is impact-resistant and is completely scratch-free. The extra safe LED fluorescent beams provide years of enjoyment, you will receive a 5-year warranty on this LED tube.

Safe transport

The fluorescent LED tubes are shipped in an extra thick and sturdy cardboard tube, which guarantees safe transport of your fluorescent tubes.

Bright daylight white light color

The bright daylight white 6000K light color provides super bright white lighting. The daylight white light color identically replaces the traditional 860 light color and is especially suitable for areas where a lot of concentration is required, such as workshops, office spaces and your garden house. Due to the high quality T5 fluorescent tubes, the light bar still retains its high performance and the bright daylight white light color after 15 years.

100% flicker free

By applying the latest LED Chip technology, the fluorescent tubes are completely flicker-free. With the fluorescent LED tubes you will never again be bothered by flickering fluorescent lighting. Suitable in areas where a high dose of concentration is desired, such as: offices or workshops. The handy plastic part of the tube ensures that you have an even distribution of your light. As a result, you will never again be bothered by uneven points of light on your fluorescent lighting.

Easy installation on your old fluorescent fixture

Thanks to the handy T5 fitting, you can install the LED tube directly and easily in any traditional fluorescent fixture, so you no longer need a new fluorescent fixture. Because the T5 LED tubes are compatible on every fixture, you no longer need a dummy starter. This is therefore not included. Because the dummy starter is no longer present, it is important to remove the VSA/Ballast (cut the wires to the block where VSA/Ballast is located. Connect both wires to each other by means of a crown socket or welding clamp and connect them easily to the N (Neutral) wire from the fitting. Switching to an LED fluorescent tube has never been so easy...

Very suitable for projects

Due to the high power factor of 0.95, this LED tube is very suitable for large projects. Because of this power factor, much less current flows back to the group to which it is connected. If you choose an LED tube with a power factor of 0.95 (with 5 percent flowing back), you can connect hundreds of tubes to this group. This makes the tube very suitable for larger installations and projects.

Suitable for

• Garage
• Salvage
• Office
• Garden shed
• Workplace
• Hall
• corridor