HOFTRONIC™ - 10x LED T8 (G13) tube 120 cm - 12-18 Watt - 3600 Lumen - 6000K replaces 150W (150W/860) Flicker-free - 200lm/W

Adjustable LED T8 (G13) fluorescent tube of 120 cm - 12-18 Watt flicker-free (Replaces 150 Watt - 150W/860) gives 3600 Lumen - 200lm/W - 6000K Daylight white light, extra suitable for your garage.

This LED T8 tube is manufactured from the highest quality materials and equipped with high lumen LED chips. The uniqueness of this LED tube is the high light output of 200 Lumen per Watt, this ensures low consumption and a high light output of 3600 Lumen. By replacing your traditional fluorescent tubes with this high lumen LED tube, you will immediately start saving money and you will have a higher light output. This LED tube can be replaced one-on-one with your current fluorescent tubes without modifying your current fixture, which means that no installer is needed. When connecting the TL LED tube to a Hoftronic luminaire, you no longer need a dummy starter. 

Adjustable wattage

This LED T8 light tube 120 cm has a unique feature: you can adjust the power in two wattages. The wattages on which you can set the LED T8 TL tube are 12 Watt and 18 Watt. At 12 Watt the luminous flux is 2400 lumens. At 18 Watt the luminous flux is 3600 lumens.

Flicker-free unique patented design

The LED tube has a unique design in which only the highest quality components are used to guarantee unique quality. This LED tube has a patented design which provides an elegant appearance, the housing is made of pure 6063 aluminum and plastic which ensures that there is excellent heat dissipation. The plastic ensures a uniform light distribution. Due to the unique internal structure and high quality components such as a Japanese Rubycon capacitor, where the internal heat generation is up to 91% less than the standard LED tubes. This combination ensures that this LED tube has a guaranteed long life span of 50,000 hours. Due to the unique internal structure and high quality components, this tube is flicker-free, which is very important when switching to LED. 

Installation

For both LED and conventional luminaires, we recommend that you always ensure that the tube is connected directly to 230V on a single side, this will increase the length of the service life. This LED tube is only suitable for power supply on the Input side, this is indicated on the cover of the tube.

If you have a traditional fixture? That's not a problem either, this LED tube is extremely suitable for replacement, there are therefore several possibilities concerning the installation in a traditional fixture. The standard LED T8 tube comes with an LED starter. If you have a fixture that is equipped with a conventional starter and you want to leave the traditional transformer in place, you can use the supplied LED starter. 

Product Advantages

• Patented Design & Flicker-Free Technology
• Pure 6063 aluminium for improved heat dissipation
• Fits perfectly in traditional luminaires
• Easy installation
• Long life 100,000 hours & 10 year warranty
• Including LED Starter