HOFTRONIC™ - Blenda wall lamp - Black - Motion detector and twilight switch - IP44 splash proof - Up & Downlight for outdoor use - Excluding two GU10 spotlights

Durable LED Wall Light Blenda in black - A modern and dimmable Up and Down wall light with motion sensor and twilight switch

Looking for a modern and multifunctional wall light for outdoors? Then choose this Blenda downlight with sensor. The motion sensor and dimmer switch can work together seamlessly, but they can also be set independently of each other. This way, both the twilight switch and the motion sensor can be turned off completely and you can adjust this wall-mounted spotlight exactly as you wish. This is exactly why the Blenda is one of the most popular lamps in our range.

Product features

• Motion detector and twilight switch: With these functions you can choose to switch on the spotlight when it detects movement and/or sunlight
• Adjustable motion sensor: The motion sensor can be adjusted with two functions: The delay time and the detection distance. The delay time can be set between 3 seconds and 10 minutes and the distance between 3 metres and 7 metres
• Adjustable twilight switch: The motion sensor is set to a lux value. By turning the screw all the way to the left, the lamp ignores the twilight switch. If you turn the screw to the right, the lamp will use the sensor more and more. Can be set to more than 10 positions
• Up and down light: A unique design is created by placing a light source which shines both upwards and downwards
• Luxury finish: The Blenda is made of aluminium with a black coating. Because of this design, the lamp does not attract dust and dirt, the wall lamp is lightweight and does not rust.
• IP44 waterproof: By using water-repellent rubbers and a seamless finish, the Blenda with sensor is IP44 waterproof. This makes it suitable for both indoor and outdoor use
• With GU10 fittings: The Blenda is fitted with two GU10 fittings. This allows you to choose the desired light colour, lumen and beam angle. In the event of a defective light source, there is no need to replace the entire lamp
• Extended lifespan: The finish of this wall light not only provides a modern look, but also offers a maintenance-free wall light that will last for years.
• Easy installation: The Blenda is delivered ready for installation, including: screws, plugs and washers. You connect the Blenda directly to the 230 Volt mains. You do not need to take a transformer or driver into account
• Automatic versus manual: HOFTRONIC's wall lights are unique in that the sensor can be switched off, leaving the light on. This is done in manual mode

Adjustable motion detector and twilight switch

With the motion detector, you can set the Blenda wall spot to switch on as soon as someone approaches the LED lamp. You have the option of setting it so that the spotlight shines as soon as someone approaches between 3 and 7 metres. The twilight switch works on sunlight, as soon as it gets darker outside, the wall light will switch on. Both the motion detector and the twilight switch can be set independently or in conjunction with each other:

Motion Sensor

The motion sensor can be set to delay time and detection distance.

• Delay time: The delay time determines how long the light stays on after detecting movement. By setting the delay time, you determine how sensitive the lamp is to movements. You can set it to a value between 3 seconds and 10 minutes.
• Detection distance: The detection distance determines the distance of movements to which the wall light responds. This can be set to a value between 3 and 7 metres.

Twilight switch

The twilight switch ensures that the wall light reacts to the ambient light. It is fully adjustable from "off" to very sensitive. Turn the setting all the way to the left and the Blenda wall light will ignore the twilight switch, turn it to the right and the wall light will only switch on when it starts to get dark.

Can't quite work out the installation? Please contact our customer service (phone, WhatsApp, email & Live-Chat)! We are happy to help you for the best result.

Automatic versus manual

The Blenda wall lights have a unique feature. You can switch off the sensor so that the lamp stays on. How do you do this? Very simple. When you switch on the lamp, the PIR detector stays in a warm up phase for about a minute. After this it automatically switches to automatic mode. In this mode, you turn the lamp on and off twice within three seconds. After this, turn the lamp on again and the PIR detector will be in manual mode. In this mode, the lamps remain switched on. This is quite handy, when you are seated in your garden and you want your lights to stay on. Therefore, this manual mode is energy efficient.

Including two GU10 fittings

The Blenda spotlight is fitted with two standard GU10 fitting. This means that you can choose what kind of GU10 you want to put in the lamp. Are you installing this LED spotlight above your front door? Then it is best to choose a bright 4000K or 6000K GU10 spot. Will the Lago LED lamp be installed in your garden? Then choose a warm white GU10, for a more atmospheric lighting.

Also take a look at our Smart GU10 spotlights! For optimal use of your lighting.

Protection class IP44

The Blenda has a high-quality aluminium finish and a black coating. The luminaire is seamlessly finished and therefore provided with an IP44 watertightness. In this case, this means that the lamp is splashproof. So you can hang the wall lamp outside with peace of mind.

Easy installation

The Blenda LED wall light is delivered Plug & Play. This means that everything you need to assemble it is in the box. As soon as you receive the package, you can immediately start hanging the spotlight! After assembly, all you have to do is place a GU10 LED light source of your choice in the fixture, switch on the light and enjoy. You can also place this fixture in any room. The Blenda is easy to install due to its common dimensions of 108 x 66 x 212 mm.

Please note: This fixture is delivered without a GU10 spot. Take a look at our GU10 spotlights and order your desired light source immediately. 

HOFTRONIC

The Blenda wall light with sensor is from the qualitative brand HOFTRONIC. HOFTRONIC is both a manufacturer and a seller of LED lighting. This allows you to benefit from the best price, highest quality and best warranty conditions. You will receive a 3-year guarantee on this Blenda wall light. 

• 1x Blenda LED wall lamp black with sensor
• 1x Allen key
• 2x Screws
• 2x Washers 
• 2x Plugs