HOFTRONIC™ - Dimmable LED Strip - 50m - 6000K - 60 LEDs/m - IP65 - Plug & Play - SMD 2835 - Flex60 Series

Dimmable LED Strip 50m 6000K 60 LEDs/m IP65 Plug & Play - Flex60 Series

This complete LED Strip in 6000K daylight white is supplied complete including power adapter with EU plug. Use this waterproof and dimmable LED Strip if you want to create more atmosphere in your home or outside your home. This 50 meter long LED light hose can be used in many ways in your bedroom, bathroom, living room, hallway or under your bed. Thanks to the IP65 certification, you can also use this light hose outdoors or in damp rooms. This is very useful if you want to create a cozy atmosphere around your house or garden with a Plug & Play light hose.

Product features

• 60 LEDs per meter: Our Flex60 LED strips consist of 60 LEDs per meter
• IP65 certification: This makes the LED strip waterproof and dustproof. You can even use them outside
• Light output: Thanks to the high quality LED chips you have a total light output of 15400 lumens
• Energy efficient: The Flex60 series is in combination with the high light output also very economical with a total consumption of 275 watts
• UV resistant: This strip does not discolor in the sun and retains its beautiful light colors
• Plug & Play: The set comes complete and is very easy to install for quick use
• Shortenable: You can easily shorten the strip per meter with scissors. This is indicated by means of cut lines on the strip
• Extendable: The LED strip is also extensible to a maximum length of 100 meters
• Dimmable: Control the LED strip easily with the supplied remote control or of course with a wall switch or wall dimmer

Flex60 equipped with 60 LEDs per meter

As the name suggests, the Flex60 series is equipped with 60 high-quality LEDs per meter. This means that with this LED strip you have a total of 3.000 LEDs at your disposal. These ensure that the light is perfectly distributed in the room where the LED strip is mounted. The LED strip is made of maintenance-free and robust PVC material. This ensures that you will enjoy your LED strip for many years.

IP65 waterproof and dustproof

This LED strip has an IP65 protection class. Do you want to use the strips outside or in a damp room? Then make sure that the connection of the power supply with the LED strip is glued closed with the supplied glue. This is of course not necessary if you want to use the strip indoors.

High light output

Thanks to the high-quality LED chips, you have a total light output of 25500 lumens. That is no less than 510 lumens per meter.

Energy efficient

Where you normally also have a high consumption with a high light output, that is not the case here. The LED strip has a total consumption of 275 watts, which is equivalent to a low consumption of only 5.5 watts per meter.

Resistant to UV light

Because high-quality materials have been used, you do not have to worry about the influence of sunlight. The LED strip is completely UV resistant and will therefore not be weathered by the sun.

Plug & Play

The LED strip is Plug & Play. No more hassle with looking for the right accessories. The LED strip comes with the correct power supply and a tube of glue with which you can make your LED strip completely waterproof.

Can be shortened

The Flex60 LED strips can be shortened per meter. You can easily read this on the strip via the indicated cutting lines. Make sure that you make the end piece of the strip waterproof again with an end piece which you have to glue again with the supplied glue.

Renewable

If you want to connect an extra piece of LED strip, that's no problem. The LED strip is easy to extend to a length of no less than 100 meters.

Dimmable

Our Flex60 LED strip is dimmable as standard, but you have to purchase the dimmer separately for this.

Mounting material

The LED light hose is supplied with a power supply. If you still want to order a few extra sealing caps, you can do that below by clicking on the link. If you want to make the light hose longer, you can also order the connectors. We also advise you to order mounting clips if you want to attach the LED light hose to a wall/ceiling/post. This ensures that you go through the assembly without any worries and that you connect everything according to the regulations.

• Sealing cap - for a watertight shortening of the light hose.
• Connector - for connecting several light hose pieces (not watertight).
• Mounting clips - for mounting the light hose.
• Power supply - if you want a spare power supply, you can purchase it now.
• IP65 splash-proof junction box - to protect the power supply against moisture.

//Downloads//

Manuals:

Data sheet:

1x LED Strip
1x Power Cable
1x Glue Tube