HOFTRONIC™ - Dimmable LED Strip - 10m - 3000K - 120 LEDs/m - IP65 - Plug & Play - SMD 2835 - Flex120 Series

Dimmable LED Light Hose 10m 3000K 120 LEDs/m IP65 Plug & Play - Flex120 Series

This complete LED light hose 3000K warm white will be delivered including mains adapter with EU plug and 1 end cap. Use this beautiful dimmable LED light hose if you want to create more atmosphere in your home or outside your house. This LED light tube of 10 meters long can be used in many ways in your bedroom, bathroom, living room, hallway or under your bed. Because of the IP65 certification you can also use this light hose outdoors or in humid rooms. This is very handy when you want to create a cosy atmosphere around your house or garden with a Plug & Play light tube.

Dimmable

You can dim this LED Light hose by purchasing the right LED dimmer with remote control with which you can dim the LED Light Hose. With this remote control you can dim the light hose at a distance so you can always determine the right atmosphere. 

Advantages LED light hose Flex120 Series

• No less than 50,000 burning hours
• Light output 5 Lumens per LED
• Low consumption of 8 Watt per meter
• UV-resistant: provides years of pleasure because the light tube does not change its colour with the amount of sunshine that shines on it.
• Plug & Play installation: This LED light hose can be connected directly to the mains, you don't need a transformer. The flat light strip is fully Plug & Play made which makes the installation very easy.
• The light hose can be cut every 1 metre by means of a marked cutting strip. Please note, if you want to shorten the LED strip, we advise you to purchase a sealing cap. This ensures that the cut-off end is watertight.

Important information for outdoor installation!

Our Flex LED Strips series are suitable for indoor and outdoor use. Do you want to use the strips outside? Then first seal the power supply waterproof with the included glue. This is not necessary if you want to use the strip inside. We have not yet sealed the LED strip, because this makes it possible to shorten the LED strip. The LED strip is made of maintenance-free and robust PVC material. This ensures that you will enjoy your LED strip for many years.

Mounting material

The LED light hose is supplied with power supply and 1 end cap. If you still want to order a few extra end caps, you can do so below by clicking on the link below. If you want to make the light hose longer, you can also order the connectors. We also advise you to order mounting clips if you want to mount the LED light hose on a wall/ceiling. This will ensure that you go through the assembly without any worries and that you connect everything according to the instructions. 

• Sealing cap - for a watertight shortening of the light hose.
• Connector - for connecting several pieces of light hose (not water tight).
• Mounting clips - for mounting the light hose.
• Power supply - if you want a spare power supply you can press this link to order it.
• IP65 splash-proof junction box - to protect the mains power supply against moisture.

1x LED Strip
1x Power Cable
1x Glue Tube